Capacitor Derating Calculator — Voltage & Power Limits

Safe operating limits for reliability

Required Parameters

W
%

Enter more than 0 and up to 100. 50 means half the rating is allowed; it is an example assumption.

Waiting for input data...

Quick Answer

Voltage limit = rated voltage × allowed percentage / 100. With an example 50% factor, 16 V gives an 8 V limit. Choose the factor from the part documentation and your design requirements.

Documentation

How to use the capacitor derating calculator

Enter the capacitor's rated voltage and the allowed percentage of that rating. The calculator starts with 16 V and 50% as an example, giving an 8 V voltage limit. Choose the actual factor from the component documentation and your project requirements.

Voltage limit = rated voltage × allowed percentage / 100. An allowed percentage of 80% means operating at up to 80% of the rating, a 20% reduction.

Worked example: a 12 V rail

With a chosen 50% factor, a 16 V capacitor has an 8 V limit, so a 12 V rail exceeds that design limit. The minimum rating is 12 / 0.50 = 24 V. A 25 V candidate gives a 12.5 V limit under that assumption. Check supply tolerance and transients before selecting the part.

Rated voltageExample allowed percentageCalculated limit
16 V50%8 V
25 V50%12.5 V
25 V80%20 V

These percentages illustrate the arithmetic; they are not recommendations for every capacitor technology.

Voltage derating and DC bias are separate checks

This tool calculates a voltage design limit, not effective capacitance. DC bias behavior depends on the exact part. Do not assume that operating at half the rated voltage preserves half, or all, of the nominal capacitance.

Read the manufacturer's DC bias explanation and look up the exact part number in Murata SimSurfing to inspect its characteristics. Also check temperature, tolerance, aging and ripple for your application.

Resistor power mode

Select Resistor to work in watts. Enter the power permitted at your operating temperature using the manufacturer's derating curve, then apply your design percentage. For example, 1 W × 50% gives 0.5 W. Voltage and pulse limits require separate checks.

Semiconductor temperature mode

This mode multiplies the entered Celsius rating by a percentage. It does not establish a universal safe temperature or predict lifetime. Choose a datasheet-based junction-temperature target and calculate actual temperature from ambient temperature, dissipation and thermal resistance.

Related tools

Design Notes

The percentage is the allowed fraction of the rating, not the percentage removed. 50% is an example, not a universal MLCC rule. Voltage stress and effective capacitance under DC bias are separate checks: consult the curve for the exact part number. This calculator does not predict lifetime or certify compliance.

Common Mistakes

  • 1

    Treating an example percentage as a universal rule for every component.

  • 2

    Assuming voltage margin guarantees the required effective capacitance under DC bias.

  • 3

    Using a resistor headline power rating without checking its temperature derating curve.

Engineering Handbox

1. Select Capacitor mode 2. Rated voltage = 16 V 3. Derating factor = 50% (0.50) 4. Example voltage limit = 16 × 0.50 = 8 V 5. Compare to rail: 12 V supply → 12 V > 8 V → exceeds the selected design limit

VerificationUnder this example factor, 12 V / 0.50 = 24 V minimum rating. A 25 V candidate meets this voltage check; verify other datasheet limits separately.

Knowledge Base

How do I calculate capacitor voltage derating?

Multiply rated voltage by the allowed percentage divided by 100. For example, 16 V × 50 / 100 = 8 V. Choose the factor from the specific part documentation and your design requirements.

Is 50% required for every MLCC?

No. The starting 50% value is an example assumption, not a universal rule. Check the manufacturer documentation, operating conditions and project requirements.

Does this calculate effective capacitance under DC bias?

No. This tool calculates a voltage limit. Check the manufacturer's DC bias curve for the exact part number to evaluate effective capacitance, along with temperature, tolerance and aging.

What rating do I need for a 12 V rail?

With an example 50% allowed percentage, the minimum rating is 12 / 0.50 = 24 V. A 25 V candidate meets that voltage check. Verify supply tolerance, transients, capacitance, temperature and ripple separately.

How do I use resistor mode?

Enter the power permitted at your operating temperature from the datasheet curve, then apply your design percentage. A 1 W rating at 50% gives 0.5 W. Check voltage and pulse limits separately.

Does this predict lifetime or verify a standard?

No. This is a calculation using your chosen percentage, not a compliance or lifetime assessment. The semiconductor mode only multiplies a Celsius rating; use a datasheet-based temperature target and thermal calculation for design.